Fellert Acoustical Plaster
Fellert Acoustical Plaster Fellert USA Home Page About Fellert Acoustical Plaster Contact Fellert Acoustical Plaster
Fellert Acoustical Plaster Products Technical Information Sustainability Details Finishes Projects Sales Representatives Online Fellert Acoustical Plaster Binder
LEED

LEED STATEMENT [Printable Version]

What is Fellert?


Fellert is a hand-crafted seamless sound absorption
system. The Fellert system originated in Sweden
and consists primarily of fiberglass boards and
acoustical plaster.

The fiberglass board is typically attached to gypsum
wall board with a cementitous adhesive; the
acoustical plaster is mixed with water and applied
with a spray machine and troweled to an
approximate thickness of 1⁄8".

 

MR CREDIT 4
Recycled Content

Average % on Primary System Components

  • Fellert Fiberglass Board: Approximately 30%
    post-consumer and 5% pre-consumer recycled
    content
  • Fellert Acoustical Plaster: Approximately 30%
    post-consumer content—recycled cotton material

Average % per Weight (1.05 lb SQFT 1" system)

  • 4.3% pre-consumer recycled content
  • 26.6% post-consumer recycled content

IEQ CREDIT 4
Low Emitting Materials

The Fellert acoustical plaster was tested for VOC and IAQ:

  • Implied zero VOC as per ASTM D3960
    “Determination of Volatile Organic Compound
    (VOC) Content in Paints and Related Coatings”
  • Meets California’s Section 01350 IAQ emission
    requirements

IEQ CREDIT 7
Thermal Insulating R Value

  • Thermal Conductivity ASTM C-177 @ 75 F on
    6.0 PCF 0.22
  • 1" Fellert Fiberglass Board 4.55 R Value

IEQ CREDIT 8
Light Reflectance

  • 0.79–0.80 As per ASTM E1477-98a
Fellert Ecoustic USA All Rights Reserved